| |
 |
 Honeycomb Aluminum Vent Panels 210 SERIES
 East Coast Shielding aluminum shielded air vent panels are fabricated from an aluminum honeycomb medium installed in an aluminum frame. The honeycomb provides high levels of shielding with a minimum resistance to air flow.
APPLICATIONS:
East Coast Shielding honeycomb vents are recommended for installation in electronic equipment enclosures that require high levels of EMI shielding while allowing for adequate ventilation. East Coast Shielding honeycomb vents can be installed in applications requiring shielding on either the inlet or outlet air flows.
AVAILABLE CONFIGURATIONS:
East Coast Shielding honeycomb vents are typically constructed of
0.500"(12.70) thickness, 90 degree aluminum honeycomb, with a
0.125"(3.18) cell size. The honeycomb is also available in 0.250"(6.35)
thickness and cell sizes of 0.062"(1.57) and 0.188"(4.78). For drip proof
construction, the cells are also available slanted at 30, 45 and 60 degrees
from the horizontal. For mounting, the panels are available with captive
inserts, through holes or no holes. The completed assembly can be
chromate conversion coated or tin plated for protection. East Coast
Shielding honeycomb vents are supplied with an attached mesh, strip, or
conductive silicone fabricated gasket. For shapes, sizes and materials not
listed, please contact East Coast Shielding for additional information.
|
|
 |
|
|
