EAST COAST CONDUCT-O

Conduct-O-Knit Knitted Wire Mesh

ECS1 Series Conduct-O-Knit materials consist of an elastomer core with knitted wire mesh or as a knitted wire mesh over. The knitted wire mesh can be fabricated with .0035" (0.089) or .0045" (.114) diameter Monel or SnCuFe (tin-plated, copper-clad steel) Wire or with .005" (.127) diameter Aluminum Wire. The standard wire materials are Monel. Monel is used mostly because of it’s good aging properties & excellent tensile strength. The elastomer cores are available in Neoprene Sponge, Silicone Sponge, or Solid Silicone Tubing.

Conduct-O-Knit PDF

Conduct-O-Seal Combo Gasket

The ECS2 series gaskets combine bonding mesh in parallel with an elastomer environmental sealing strip. The knitted mesh can be made from Monel, SnCuFe (tin-plated, copper-clad steel), or aluminum wire. The elastomer seal is available in silicone or neoprene, sponge or solid.

Conduct-O-Seal Combo Gasket PDF

Conduct-O-Elastomer

ECS has developed a line of conductive silicone elastomers that are designed to meet the requirements outlined for the MIL-G-83528 specification. Our conductive materials are used to produce shielding gaskets for Military, Aerospace, electronics, and communications applications. Our range of conductive silicones has expanded to include materials that are designed to balance requirements for electrical conductivity and cost performance for the commercial sector.

Conduct-O-Elastomer PDF

Conduct-O-Seal Oriented Wire in Silicone Gasket Material

East Coast Shielding Oriented wire in silicone ECS4 Series gasketing material is a combination EMI shield and environmental pressure seal. Produced on location, this product is fabricated with individual wires positioned perpendicular to the flange mating surface and is crimped to enhance proper contact. Available in a solid silicone, fluorosilicone or sponge silicone binder, East Coast Shielding can accommodate you with the proper material to make your application successful.

Conduct-O-Seal Oriented Wire in Silicone Gasket Material PDF

Conduct-O-Mesh Tape

ECS5 is available in Monel or SnCuFe (tin- plated, copper-clad steel) wire. ECS5 Mesh Tape is used for wrapping cable assemblies and provides excellent shielding characteristics. ECS5 Mesh can be purchased as a double layer knitted wire mesh tape.

Conduct-O-Mesh Tape PDF

Conduct-O-Foam

ECS standard 200-Series profile gaskets contain a closed cell foam core wrapped with a plated fabric. Our fabric-over-foam continuous strip gaskets have excellent shielding effectiveness (SE), high durability, low compression set and low resistance.

Conduct-O-Foam PDF

Conduct-O-Bond

Conduct-O-Bond ECS 2000

Technical Data SheetConduct-o-Bond ECS2000 Electrically Conductive Adhesive

Ask about other types of conductive adhesives offered by ECS...

Conduct-O-Bond ECS 2000 PDF

Conduct-O-Bond ECS 5000

Technical Data Sheet Conduct-o-Bond ECS5000 Electrically Conductive Adhesive

Conduct-O-Bond ECS 5000 PDF